Check the AC power adapter that came with the tablet by using a known good Micro-USB cable with known good tablet, if available.The best way to troubleshoot this issue is to setup a test station with a known good tablet, AC power adapter and Micro-USB cable, if available. Using other power adapters or micro-USB cables may cause damage to your tablet. Use only the power adapter provided for charging the tablet. Continue charging the tablet.Ĭaution: Charge the battery in an ambient temperature of 0 degrees Celsius (32 degrees Fahrenheit) to 35 degrees Celsius (95 degrees Fahrenheit). If the power button is pressed during this state, the LED will turn on for 3 seconds and then turn off. The battery is at a critical level and does not have enough charge to power on. The battery is not charging or the battery is fully charged. The battery is at low level with the tablet is on or in a connected standby state - the screen is off but the tablet is still turned on. The charge status can be checked from within the operating system. Normally, the battery will require about 4 hours to fully charge.The micro-USB port is located on the upper right edge of the tablet ( Figure 1 and 2). To charge the device, always use the AC power adapter with the USB-to-micro-USB cable supplied with the device. When it is connected to a USB port on a computer, it automatically switches to data transfer mode and will not charge the battery.
#How to use bluestacks on dell venue 8 pro pro#
The micro-USB connector on the Venue 8 Pro (3845) can support data transfer or AC power but not both at the same time.When the tablet is charging and the LED flashes amber, the battery is at a critical level and does not have enough charge to power on. You may need to charge the Venue 8 Pro (3845) tablet before you use it, as it is possible for the tablet to discharge during shipping.